Netapp Show RAID Configurtion, Reconstruction Info.
Apr 29th , 2013
Netapp Show RAID Configuration, reconstruction information. This command displays Netapp RAID setup and rebuild status and other information such as spare disks.
Netapp Display RAID configuration
Enter the following command to show the RAID config:
The output should look similar to:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
netapp> aggr status -r
Aggregate aggr0 ( online, raid_dp) ( block checksums)
Plex /aggr0/plex0 ( online, normal, active)
RAID group /aggr0/plex0/rg0 ( normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used ( MB/blks) Phys ( MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity v5.16 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
parity v5.17 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
data v5.18 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
Spare disks
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used ( MB/blks) Phys ( MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
Spare disks for block checksum
spare v5.19 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.20 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.21 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.22 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.24 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.25 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.26 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.27 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.28 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.29 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
spare v5.32 v5 ? ? FC:B - FCAL 15000 1020/2089984 1027/2104448
This Netapp HowTo is useful for the following
Show Netapp RAID Configuration
Netapp Show Disks
Show Spare Disks Netapp
Netapp Show Speed of Disks
Netapp Show Fiber Channel
Show Netapp RAID Rebuild
Netapp RAID Reconstruction info
Netapp RAID Build Status
You might be interested in my other Netapp Commands & HowTo’s .